Symptom: The toolbar layout is out of order. Solution: You may reset the toolbar layout to make it back to the factory condition. Please follow the procedure below: 1.) Close EmbroideryStudio e4.2 2.) In File Explorer, go to the folder below: C:\Program Files\Wilcom\EmbroideryStudio_e4.2\BIN 3.) double click on this file: ResetProfile.BAT Note: This will reset the…
Fuzzy Edge Of Wide Satin Stitches On LCD Screen Symptom: The edges of the lettering and shapes aren’t sharp and the stitches seem to be going further out of the shape. This is due to inadequate screen calibration. Wilcom Software affected: EmbroideryStudio e4.1H Solution: Please follow the instruction below: 1. Click Setup> Calibrate Screen… 2. …
Color Palette Colors Missing When Opening A Design The Problem: Sometimes, when you open a design, the color palette colors are missing: This issue is typically caused by either: Your screen resolution or monitor size is too small to view the entire Color Toolbar, or: Your Color palette in your Color Toolbar has an…
Cannot edit 3rd party Fonts by change parameters such as underlays, spacing or pull comp Symptom: Cannot edit 3rd Fonts by change parameters such as underlays, spacing or pull comp Wilcom Software affected: EmbroideryStudio e4.1 Solution: Change the Stitch method to Closest Join Note – Keep the stroke sequence, it may lose the stitch…
Stitches files such as .DST files open as stitches only in EmbroideryStudio e4 A change was made in Wilcom EmbroideryStudio e4 Update 2 to open stitches files such as Tajima .DST files open as stitches only without editable objects. This change was made to preserve special fill effects such as Program Split Patterns. To…
Completely backing up Design Workflow is a 2-step process: You must backup the SQL database. You must backup design files, TrueViews, thumbnails, stitch files, and attachments. These steps will essentially be the same in Design Workflow 2006, e1.5, e2.0, e3.0, and e4. It is recommended that you take regular backups of your Design Workflow database.…
In case you still need to create EMB files that are compatible older Wilcom versions. This walk through will assist you in batch converting files in multiples. In Design Library, select all the necessary e4 EMB files. Then click on the Convert button. Please refer to the screenshot below. Therefore, instead of saving each…
Section 1 – How to save the favorite toolbar layout? You can save the favorite toolbar layout with the procedure below: Arrange toolbar layout in a way you prefer Go to the bin folder: C:\Program Files (x86)\Wilcom\EmbroideryStudio_e4.0\BIN Double click on this file: SaveProfileSnapshot.bat Note: The toolbar layout is saved. Section 2 – How to restore…
Section 1 – CorelDRAW X8 no longer needs to be activated (after it has been installed with a product key or serial number) as had to be done with previous versions of CorelDRAW. Section 2 – In regards to installing CorelDRAW on more than one computer: The Corel EULA says you can install CorelDRAW…
In EmbroideryStudio e4, Hardware Setup and Stitch Manager buttons are in the “Legacy Features” toolbar. Please follow the procedure below to locate at it. Right click on the empty area of Toolbar area to open the Toolbar list Turn on “Legacy Features” in the Toolbar list: Note: you will see “Hardware Setup”, “Stitch Manager”, etc.…