Reducing the number of trims for lettering

Solution: If the lettering part in the emb file is the lettering object, then you need to adjust Connectors parameter for the lettering object. This can be achieved by following the procedure below: 1)   Select the Lettering object 2)   In the Object Properties dialog box, go to the Connectors tab 3)   Select “Inside object” in…

How to update a Dongle (Brain Transplant)?

Please follow the procedure below for updating a Dongle from e1.5 or earlier versions to an e3.0 Dongle. We also call this a Dongle “Brain Transplant” procedure. Note: this procedure does not apply when updating e2 Dongles to e3. Before you start the “Brain Transplant” procedure, you must ensure that No Dongles are attached to…

How do you create your own Team Name layout?

The following procedure explains how to create your own Team Name layout: 1) Design your Team Name layout with some lettering objects 2) Select “All” 3) Go to “Object > Create Teamname Layout…” menu 4) In “Create Teamname Layout” dialog box, click on “Create” button to create a new Layout set 5) Input a layout…

How do you use Auto Fabric assistant?

Please follow the below instructions: Auto Fabric assistant will apply the most suitable properties for objects based on the size of the object and the fabric you are stitching on to. These settings can be over ridden and new Auto Fabric templates can be created. To use the Auto Fabric Assistant choose File New from…