CorelDRAW Graphics Will Not Open On A Secondary Display if The Resolution Setting of The Secondary Display Is Different From The Primary Display

Symptom: Working on the secondary monitor, CorelDRAW Graphics cannot show up when switching to CorelDRAW Graphics. It is hanging. Solution: For the main monitor, the primary display, use recommended resolution. For the extended display on the secondary monitor, set the same resolution as the primary display.

How To Reset Toolbar Layout

Symptom: The toolbar layout is out of order. Solution: You may reset the toolbar layout to make it back to the factory condition. Please follow the procedure below: 1.) Close EmbroideryStudio e4.2 2.) In File Explorer, go to the folder below: C:\Program Files\Wilcom\EmbroideryStudio_e4.2\BIN 3.) double click on this file: ResetProfile.BAT Note: This will reset the…

EmbroideryStudio e4.2 Update 1 (e4.2H) Summary

Click here to view the full EmbroideryStudio e4.2H Release Notes. Summary of EmbroideryStudio e4.2 Update 1:   IMPORTANT: EmbroideryStudio e4.2F must be installed beforehand. EmbroideryStudio e4.2 requires a 64-bit operating system. EmbroideryStudio e4.2F does not support Design Workflow. Design Workflow users should not download or install this particular update.   New or improved: Customer feedback…

EmbroideryStudio e4.2 (e4.2F) Summary

Click here to view the full EmbroideryStudio e4.2F Release Notes. Summary of EmbroideryStudio e4.2 update:   IMPORTANT: EmbroideryStudio e4.2 requires a 64-bit operating system. EmbroideryStudio e4.2F does not support Design Workflow. Design Workflow users should not download or install this particular update.   New or improved: 64-bit operating system support A new “Home screen” loads…

Fuzzy Edge Of Wide Satin Stitches On LCD Screen

Fuzzy Edge Of Wide Satin Stitches On LCD Screen   Symptom: The edges of the lettering and shapes aren’t sharp and the stitches seem to be going further out of the shape. This is due to inadequate screen calibration. Wilcom Software affected: EmbroideryStudio e4.1H   Solution: Please follow the instruction below: 1. Click Setup> Calibrate Screen… 2. …