Fuzzy Edge Of Wide Satin Stitches On LCD Screen

 

Symptom:

The edges of the lettering and shapes aren’t sharp and the stitches seem to be going further out of the shape. This is due to inadequate screen calibration.

Wilcom Software affected: EmbroideryStudio e4.1H

 

Solution:

Please follow the instruction below:

1. Click SetupCalibrate Screen…

Wilcom Setup Calibration

2.   Measure the width and the height of “Calibration Screen” dialog box with a ruler

3.   Input the values in the Width and Height value boxes respectively

Wilcom Calibration Values

4.   Click on “OK” button

Note: the grid is adjusted accordingly.

Leave a Reply