Wilcom Download Center

Download Updates, Service Packs, and software utilities for Wilcom software

Wilcom America does not take any responsibility for incorrect links or expired downloads from external resources.

Notes:

Some of the files available from this page have been compressed into .ZIP format. You can unzip them using WinZip, 7-Zip, or Windows “Extract” feature.

 

   

There are 48 files, weighing 16.6 GB with 40,794 hits in total.

Displaying 1 to 30 of 48 files.

 

EmbroideryStudio e4 Updates

  DecoLite e4.2 (e4.2J) Full Installer
» 1.9 GB - 374 hits - 07/30/2019
DecoLite e4.2 (e4.2J) Full Installer. Free update for DecoLite e4 users. View a summary of this update.

***Important Notes For DecoLite e4.2J Full Installer***

  • A 64-bit operating system is required (Windows 7 x64, Windows 8.1 x64, or Windows 10 x64).
  • For DecoLite ONLY. NOT for EmbroideryStudio.

  EmbroideryStudio e4.2 Update 2 (e4.2J) Update Installer [EmbroideryStudio Only]
» 665.1 MB - 372 hits - 07/30/2019
EmbroideryStudio e4.2 Update 2 (e4.2J) Update Installer. For users with EmbroideryStudio e4.2F or e4.2H already installed. NOT FOR DESIGN WORKFLOW. View Release Notes for the details of the fixes and the improvements. View a summary of this update.

***Important Notes For e4.2J Update***


  EmbroideryStudio and Design Workflow e4.2 Update 2 (e4.2J) Full Installer
» 4.3 GB - 371 hits - 07/30/2019
EmbroideryStudio AND Design Workflow e4.2 Update 2 (e4.2J) Full Installer. For Design Workflow e4.0 or e4.1 users to update to e4.2. View Release Notes for the details of the fixes and the improvements. View a summary of this update.

***Important Notes For e4.2J Full Installer***

  • A 64-bit operating system is required (Windows 7 x64, Windows 8.1 x64, or Windows 10 x64).
  • Design Workflow users updating from e4.0 or e4.1 should use this installer
  • Do not install update if you have EmbroideryStudio e4.2 already installed. Download EmbroideryStudio e4.2 Update 2 (e4.2J) Update Installer instead.

  Updated Madeira Thread Charts
» 14.1 KB - 222 hits - 06/06/2019
Updated Madeira Thread Charts (Classic 40, Frosted Matt 40, and PolyNeon 40)

Thread Chart Installation Instructions | EmbroideryStudio e4.2 or higher

  1. Close Wilcom EmbroideryStudio e4.2.
  2. Download the file and extract the Zipped .TCH file(s) into the following folder:
    [Windows 64-Bit] C:\Program Files\Wilcom\EmbroideryStudio_e4.2\RES
  3. Open EmbroideryStudio e4.2. The corrected thread chart should now be available.

Thread Chart Installation Instructions | EmbroideryStudio e4.1 or lower

  1. Close Wilcom EmbroideryStudio e4.
  2. Download the file and extract the Zipped .TCH file(s) into the following folder:
    [Windows 64-Bit] C:\Program Files (x86)\Wilcom\EmbroideryStudio_e4.0\RES
    [Windows 32-Bit] C:\Program Files\Wilcom\EmbroideryStudio_e4.0\RES
  3. Open EmbroideryStudio e4. The corrected thread chart should now be available.

  EmbroideryStudio e4.2 Update 1 (e4.2H)
» 612.2 MB - 634 hits - 04/22/2019
Update e4.2H for existing EmbroideryStudio e4.2 installations. View Release Notes for the details of the fixes and the improvements. View a summary of this update.

***Important Notes For e4.2H***

  • A 64-bit operating system is required (Windows 7 x64, Windows 8.1 x64, or Windows 10 x64).
  • EmbroideryStudio e4.2F must be installed beforehand.
  • Do not install update e4.2H if you use Design Workflow e4. An update for Design Workflow users will be released on a later date.

  EmbroideryStudio e4.2 (e4.2F)
» 3.6 GB - 1,344 hits - 02/20/2019
Update e4.2F for existing EmbroideryStudio e4 installations. View Release Notes for the details of the fixes and the improvements. View a summary of this update.

***Important Notes For e4.2F***

  • A 64-bit operating system is required (Windows 7 x64, Windows 8.1 x64, or Windows 10 x64).
  • Once installed a separate EmbroideryStudio e4.2 shortcut will be created. You will have two EmbroideryStudio desktop shortcuts. One shortcut for EmbroideryStudio e4 and one for EmbroideryStudio e4.2.
  • Do not install update e4.2F if you use Design Workflow e4. An update for Design Workflow users will be released on a later date.

  EmbroideryStudio e4 Update 4 (e4.1Q)
» 786.8 MB - 3,278 hits - 07/31/2018
Update e4.1Q for existing EmbroideryStudio e4 installations. View Release Notes for the details of the fixes and the improvements. View a summary of this update.

  EmbroideryStudio e4 Update 3 (e4.1N)
» 785.8 MB - 998 hits - 06/20/2018
Update e4.1N for existing EmbroideryStudio e4 installations. View Release Notes for the details of the fixes and the improvements. View a summary of this update.

  EmbroideryStudio e4 Update 2 (e4.1L R2)
» 787.3 MB - 1,092 hits - 05/08/2018
Update e4.1L R2 for existing EmbroideryStudio e4 installations. View Release Notes for the details of the fixes and the improvements. View a summary of this update.

  EmbroideryStudio e4 Update e4.1 (e4.1H)
» 785.2 MB - 1,557 hits - 01/23/2018
Update e4.1 for existing EmbroideryStudio e4 installations. Refer to the Release Notes for details of the new features, fixes and enhancements.

  Corrected Robison-Anton Card SBP-7 Poly Thread Chart
» 6.5 KB - 768 hits - 12/07/2017
This contains an corrected version of the Robison-Anton Card SBP-7 Poly thread chart for EmbroideryStudio e4. View Installation Instructions

  EmbroideryStudio e4 Update 1 (e4.0N) for Windows 7 or later
» 642.9 MB - 1,845 hits - 07/05/2017
Update EmbroideryStudio e4 to e4.0N Update 1 for Windows 7 or later . View Release Notes for the details of the fixes and the improvements.

EmbroideryStudio & DecoStudio e3 Updates

  EmbroideryStudio - DecoStudio e3 Japanese Alphabets
» 47.7 MB - 791 hits - 04/11/2017
Japanese Alphabets for ES - DS e3 users. NOTE: These alphabets will only work on ES - DS e3 or later. Installation instructions: Extract the contents of the zip file to the "WLETTER" folder located in your Wilcom ES - DS e3 installation directory. i.e C:\Program Files\Wilcom\EmbroideryStudio_e3.0\WLETTER

  EmbroideryStudio e3 Schiffli and Chenille file installation for 32bit Windows
» 6.8 MB - 870 hits - 04/11/2017
This self extracting installation adds Schiffli and Chenille files to your e3 installation. Please click here to find the installation instruction. (Only valid if you have the schiffli and chenille elements enabled)

  EmbroideryStudio e3 Schiffli and Chenille file installation for 64bit Windows
» 6.8 MB - 994 hits - 04/11/2017
This self extracting installation adds Schiffli and Chenille files to your e3 installation.

  DecoStudio Lite e3 Update 4 (e3.0V)
» 119.0 MB - 742 hits - 04/11/2017
Update DecoStudio Lite e3 to e3.0V. Please refer to the Release Note for the details of the fixes and the improvement.

  EmbroideryStudio e3 Update 4 (e3.0V)
» 206.8 MB - 954 hits - 04/10/2017
Update EmbroideryStudio e3 to e3.0V.

  DecoStudio e3 Update 5 (e3.0Y) for Win7 or later Windows
» 184.0 MB - 935 hits - 04/10/2017
Update DecoStudio e3 to e3.0Y. Please Note: this update 5 file is for Windows 7, 8, 8.1 and 10 32bit/64bit only. For Windows XP and Vista, there is another update 5 file.

  EmbroideryStudio e3 Update 5 (e3.0Y) for Vista and WinXP
» 210.7 MB - 725 hits - 04/10/2017
Update EmbroideryStudio e3 to e3.0Y for Vista and Windows XP. Please Note: this update 5 file is for Vista and Windows XP.

  ES e3 Update 6 (e3.0Z) for Win7 or later Windows
» 313.9 MB - 1,806 hits - 04/10/2017
Update EmbroideryStudio e3 to e3.0Z Update 6 for Windows 7 or later Windows OS. Please refer to the Release Note for the details of the fixes and the improvements. Please Note: this update 6 file is for Windows 7, 8, 8.1 and 10 32bit/64bit only.

EmbroideryStudio and DecoStudio e2 Updates

  DecoStudio e2 SP3
» 142.1 MB - 859 hits - 04/11/2017
If your DecoStudio e2 gives you a wrong warning, saying you seem to use the pirated software, then DS e2 SP3 can resolve this problem. It updates e2 to e2.0T.

  EmbroideryStudio e2 SP3
» 251.4 MB - 1,201 hits - 04/11/2017
If your EmbroideryStudio e2 gives you a wrong warning, saying you seem to use the pirated software, then ES e2 SP3 can resolve this problem. It updates e2 to e2.0T.

HASP Drivers

  HASP driver V7.90 GUI
» 16.2 MB - 418 hits - 12/12/2018
Version 7.90 HASP (Dongle) driver for Wilcom EmbroideryStudio e3 and Wilcom DecoStudio e3 (Windows 10, 8.1 SP1, 7 SP1). Best for most users because this has a Graphical User Interface (GUI). It is the latest HASP driver.

  HASP driver V7.90 Command Line
» 15.3 MB - 197 hits - 12/12/2018
Version 7.90 Command Line HASP driver for Wilcom EmbroideryStudio e3 and Wilcom DecoStudio e3 and (Windows 10, 8.1 SP1, 7 SP1). It is the latest HASP driver.

  HASP driver V7.81 GUI
» 16.8 MB - 568 hits - 08/23/2018
Version 7.81 HASP (Dongle) driver for Wilcom EmbroideryStudio e3 and Wilcom DecoStudio e3 (Windows 10, 8.1 SP1, 7 SP1). Best for most users because this has a Graphical User Interface (GUI).

  HASP driver V7.81 Command Line
» 16.0 MB - 374 hits - 08/23/2018
Version 7.81 Command Line HASP driver for Wilcom EmbroideryStudio e3 and Wilcom DecoStudio e3 and (Windows 10, 8.1 SP1, 7 SP1).

  HASP driver V7.80 GUI
» 19.8 MB - 477 hits - 04/12/2018
Version 7.80 HASP (Dongle) driver for Wilcom EmbroideryStudio e3 and Wilcom DecoStudio e3 (Windows 10, 8.1 SP1, 7 SP1). Best for most users because this has a Graphical User Interface (GUI). It is the latest HASP driver.

  HASP driver V7.80 Command Line
» 18.9 MB - 450 hits - 04/12/2018
Version 7.80 Command Line HASP driver for Wilcom EmbroideryStudio e3 and Wilcom DecoStudio e3 and (Windows 10, 8.1 SP1, 7 SP1). It is the latest HASP driver.

  HASP driver V7.60 GUI
» 19.2 MB - 866 hits - 07/19/2017
Version 7.60 HASP (Dongle) driver for Wilcom EmbroideryStudio e3 and Wilcom DecoStudio e3 (Windows 10, 8.1, 8, 7). Best for most users because this has a Graphical User Interface (GUI).

  HASP driver V7.60 Command Line
» 18.2 MB - 702 hits - 07/19/2017
Version 7.60 Command Line HASP driver for Wilcom EmbroideryStudio e3 and Wilcom DecoStudio e3 and (Windows 10, 8.1, 8, 7).

 Page 1 of 2  1  2  »