Click here to view the full EmbroideryStudio e4.2H Release Notes. Summary of EmbroideryStudio e4.2 Update 1: IMPORTANT: EmbroideryStudio e4.2F must be installed beforehand. EmbroideryStudio e4.2 requires a 64-bit operating system. EmbroideryStudio e4.2F does not support Design Workflow. Design Workflow users should not download or install this particular update. New or improved: Customer feedback…
Click here to view the full EmbroideryStudio e4.2F Release Notes. Summary of EmbroideryStudio e4.2 update: IMPORTANT: EmbroideryStudio e4.2 requires a 64-bit operating system. EmbroideryStudio e4.2F does not support Design Workflow. Design Workflow users should not download or install this particular update. New or improved: 64-bit operating system support A new “Home screen” loads…
Fuzzy Edge Of Wide Satin Stitches On LCD Screen Symptom: The edges of the lettering and shapes aren’t sharp and the stitches seem to be going further out of the shape. This is due to inadequate screen calibration. Wilcom Software affected: EmbroideryStudio e4.1H Solution: Please follow the instruction below: 1. Click Setup> Calibrate Screen… 2. …
nova PDF COM InitializePrinter – Error reading license Information : 4380 Symptom: Error – nova PDF COM InitializePrinter – Error reading license Information : 4380 Wilcom Software affected: EmbroideryStudio e4 Windows OS: Windows 10 x64 Solution: Reinstall all the x86 installers from e4 installation files.
novaPDF Server Could Not Be Started(5) Symptom: Error: novaPDF server could not be started(5) Wilcom Software affected: EmbroideryStudio e4 Solution: Re-install all the x86 installers from e4 installation files.
Color Palette Colors Missing When Opening A Design The Problem: Sometimes, when you open a design, the color palette colors are missing: This issue is typically caused by either: Your screen resolution or monitor size is too small to view the entire Color Toolbar, or: Your Color palette in your Color Toolbar has an…
Stitches files such as .DST files open as stitches only in EmbroideryStudio e4 A change was made in Wilcom EmbroideryStudio e4 Update 2 to open stitches files such as Tajima .DST files open as stitches only without editable objects. This change was made to preserve special fill effects such as Program Split Patterns. To…
Cannot write the Defaults file error | Debugger detected (E0030) error Symptom: EmbroideryStudio e4 Cannot write the Defaults file error | EmbroideryStudio e3 “Debugger is detected” error For EmbroideryStudio e4: “Cannot write the Defaults file” error For EmbroideryStudio e3: “Debugger detected (E0030)” error Wilcom Software affected: EmbroideryStudio e4 and EmbroideryStudio/DecoStudio/DecoStudio Lite e3 …
In case you still need to create EMB files that are compatible older Wilcom versions. This walk through will assist you in batch converting files in multiples. In Design Library, select all the necessary e4 EMB files. Then click on the Convert button. Please refer to the screenshot below. Therefore, instead of saving each…
Close Wilcom EmbroideryStudio e4. Download the file (link below), and extract the Zipped .TCH file into the following folder: [Windows 64-Bit] C:\Program Files (x86)\Wilcom\EmbroideryStudio_e4.0\RES [Windows 32-Bit] C:\Program Files\Wilcom\EmbroideryStudio_e4.0\RES Open EmbroideryStudio e4. The corrected thread chart should now be available.